HS4-BTP250-BA
Product information "HS4-BTP250-BA"
For the connection between power amplifier and multi-way speaker with passive crossover and bi-wiring terminal.
Almost every passive multi-way speaker today has a bi-wiring terminal, though the practicality of this method is still debated. To test this at a high level, we chose a passive speaker originally not designed for bi-wiring: the Tannoy Cheviot, built in 1976. The 12-inch Dual Concentric drivers with Alnico magnets used at the time are still beyond reproach today. The internal wiring of the speaker cabinets was completely replaced with basalt-sheathed twisted pairs, and the signal paths for the high-frequency and low-frequency sections were separated on the original passive crossovers. A pair of SINCOS MonoAmps in full-range mode was alternately connected to the Cheviots using the 2-pole HS4-TP250-BA with bridged signal paths at the speakers or the 4-pole HS4-BTP250-BA with bridged signal paths at the MonoAmp terminals. Both cable pairs were 3.3 meters long.
The clear result: the HS4-BTP250-BA is clearly superior, proving the positive effect of bi-wiring. While the sound difference is understandably not as pronounced as when the two Cheviots are driven by four SINCOS amplifiers via phase-parallel active crossovers, it is still clear enough to justify the extra effort for the 4-core special cable. The sound image appears tidier and clearer, and the spatial imaging is more precise.
The HS4-BTP250-BA consists of two twisted pairs, each with a 2 x 2.5 mm² copper cross-section, where each pair is individually encased in basalt, and both pairs are enclosed by a larger basalt braided sleeve. This minimizes both mutual electromagnetic interference between the two wire pairs and external interference from high-frequency magnetic fields.
Not only for modified Tannoy Cheviots but for all high-quality multi-way speakers with bi-wiring terminals, the HS4-BTP250-BA is perhaps the absolute best speaker cable available today, regardless of price!
For amplifiers with one output per stereo channel, suitable adapters are included to connect the two wires directly at the binding posts.
Other cable lengths available upon request. Please contact us.